LATEX PROCESSING FOR CREATIVE PRODUCT DESIGN

Abstract

The objective of this research is to study the properties of latex and find out the process of
processing latex as a design material. Focusing on the study and experimentation of latex
processing, it was found that latex has the properties of elasticity, high tensile resistance,
and high tear resistance. High bouncing, high stickiness Due to its electrical insulation,
chemical resistance, and deterioration resistance, it is appropriate to apply the properties of
latex to product design.
The experiment found that the right ingredients consisted of 1) latex (30 ml), 2) sulfur (30
ml), 3) ammonium bicarbonate (2.5 ml), and 4) nanozinc oxide (5 ml). Steamed with
vinegar will cause the latex to set. The resulting material has properties such as resembling a
sponge, being able to absorb water, and removing watermarks. When squeezed, it can be
loosened and restored to its original state. It is also possible to mix colors and scents. The
color should be used as acrylic, which gives a dark color due to the high concentration of the
color. The scent should be a water-based fragrance, and both color and fragrance should be
mixed into the latex before steaming, which will result in an even color and a long-lasting
scent. It is important to consider the form of the product because latex has limitations in
thickness or shrinkage that will shrink by 2-3 centimeters within 1 week.